|
Items/Model |
TS200(PLC) |
|
Picture |
|
|
Principle |
Solid Waste Incineration Treatment |
|
Burn Rate |
Average 250 kg/hour |
|
Feed Capacity |
Average 350kg/feeding |
|
Control Mode |
PLC(Programmable Logic Controller Incinerator) |
|
Combustion Chamber |
1800L |
|
Internal Dimensions |
150x110x110cm |
|
Secondary Chamber |
750L |
|
Smoke Filter Chamber |
Yes |
|
Feed Mode |
Manual |
|
Voltage |
220V |
|
Power |
0.9Kw |
|
Oil Consumption (kg/hour) |
Typical 28 |
|
Gas Consumption (m3/hour) |
Typical 33.6 |
|
Temperature Monitor |
Digital Display |
|
Temperature Protection |
Yes |
|
Oil Tank |
300L |
|
Feed Door |
80x60cm |
|
Chimney |
10Meter |
|
Chimney Type |
Stainless Steel |
|
1st. |
Gross Weight |
|
8500kg |
External Dimensions |
|
300x160x190cm |
Burner operation should be Automatic On/Off |
|
Fuel: diesel |
The provider must provide necessary information for the finest of the installation |
|
This incinerator with”PYROLYTIC” combustion must have: |
; |
・ Refractory concrete:
§. Thickness : ≥100 mm
§ . Nature: 42 percent of Al203
・ Insulate in fibrous panels:
§. Thickness: ≥75 mm
・ Character: Calcium silicate.
* Burner of lighting of waste, with gas, regular mono-bloc casting guiding plunging flame, lighting and security of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Plate of combustion in Carborundum, preventing the fixing of glass and slags.
A chamber of post combustion of gases
* A burner of combustion of gases,
* A device of injection of air allowing a entire recombustion of gases,
* A device of air inlet of cooling of waste gases,
* A sheath of evacuation of the gases burnt.
* Carcass in strong sheet steel with support of connection.
* Composition of the refractory;
・ Refractory concrete:
§ Thickness: ≥150 mm
§ Character: 65% of Al203
・ Insulate in fibrous panel:
§ Thickness: ≥85 mm
Character: Calcium
§ Nature: 65% of Al203
・ Insulate in fibrous panel :
§ Thickness: ≥85 mm
Nature: Calcium
