This model is small-scale waste incineration equipment for small waste output.
Construction is dual/double combustion chamber with 02 units oil/gas burner.
Waste feed chamber is around 900Liters (
0.9m3 , YD-50). Primary & Secondarycombustion chambers and included mix-combustion chamber. Waste load on the
bottom of chamber. Incinerator panel control suit for local operation.
Model
YD-50 with wet scrubber
Picture
Burning Rate
Average 50 kgs/hour
Feed Capacity
Average 100 kgs
Primary Combustion Chamber
900 Liters
Secondary Combustion Chamber
200 Liters
Mix Combustion Chamber
Yes
Smoke Filter Chamber
Wet Scrubber(
) Washing Tower Feed Mode
Manual
Voltage
220V
Power
7 Kw
Fuel Type
Diesel Oil/ Natural Gas/LPG
Burner
Original Italy Oil Consumption (Diesel Oil)
16.9 kg /hourGas Consumption (Natural Gas)
***
Internal Dimensions
120x90x
85cm (primary chamber)External Dimensions
400x200x
230cm (without chimney)Temperature Monitor
Yes
Oil Tank Capacity(if oil fuel)
300 Liters
Door Opening
62 x
68cm Chimney Length
5.0 Meters
Chimney Type
Stainless Steel
Equipment Gross Weight
6000 kgs
Operation Technical Specifications
Primary Chamber Temperature
800℃ –-1000℃ Secondary Chamber Temperature
1000℃ -1200℃ Residency Time
2.0 Sec.
Burning Efficiency
>98%
Waste Lower Calorific Power
3000Kcal
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator
Tel: +86-25-8461 0201
Nanjing Clover Medical Technology Co.,Ltd.